 |
|
|
 |
| |
Helps You Quick Charge
Your iPhone/ iPad/ iPod Touch |
|
 |
 |
There’s no denying that the Apple iPhone, iPad and iPod Touch have been a huge success and many of you may own one. However, both devices suffer from one
small problem, they don’t charge very fast when connected to your PC. Wouldn’t it be great if your iPhone charged just as quickly from your computer as it does
from the charger?
GIGABYTE’s latest motherboards are equipped with ON/OFF Charge technology which allows you not only to charge your iPhone, iPad or iPod Touch, but it allows
you to Quick Charge it. As an added bonus, it can even be charged when your PC is turned off, so even if you forget to plug it into your charger after you’ve synced
up your music, it will be fully charged when you need it. |
|
 |
 |
Quick Charge for iPhone/ iPad/ iPod Touch |
|
|
Working |
Standby |
Suspend to RAM |
Suspend
to DISK |
Shutdown |
Charge Time
(Lower is Better) |
(S0) |
(S1) |
(S3) |
(S4) |
(S5) |
| |
GIAGBYTE
ON/OFF
Charge |
YES |
YES |
YES |
YES* |
YES* |
|
| |
|
NO |
NO |
NO |
NO |
NO |
|
* Due to certain mobile phone limitations, users may need to connect the mobile phone to their PC before the PC enters S4/S5 mode to enable a quick charge from non
On/Off Charge USB ports.
* Charging results may vary by model |
|
 |
 |
| |
Based on GIGABYTE’s unparalleled 3x USB power boost design, plus an entirely new hardware design,
GIGABYTE ON/OFF Charge Technology provides a set of white and red colored USB pin headers that can
easily be connected to your system’s front USB 2.0 ports, that not only act as a normal USB port, but also
double as a quick charge ports for your mobile device. It doesn’t matter if your iPhone, iPad or iPod Touch is
plugged into the quick charge USB port while the system is turned on, in sleep/standby mode, or even turned
off, as it always enables you to charge your iPhone, iPad or iPod Touch.
|
Quick Charge will also cut the charging time by up to 40 percent thanks to yet another innovative GIGABYTE design. The
reduced charging time means it only takes about two hours to fully charge your iPhone, iPad or iPod Touch, something that
would take in excess of three hours using a standard USB port.
|
|
 |
When you install the ON/OFF charge driver, please update the latest BIOS version for the best product efficiency. |
|
| * Maximum 3 devices can be charged at the same time. Charging current may vary with PSU 5V stand-by spec. |
|
 |
|
|
