GA-P35-DS3P (rev. 2.1)

Specification
Intel® P35 + ICH9R Chipset
 
  • CPU
    CPU
    1. Support for an Intel® Core™ 2 Extreme processor/ Intel® Core™ 2 Quad processor/Intel® Core™ 2 Duo processor/ Intel® Pentium® processor Extreme Edition/Intel® Pentium® D processor/ Intel® Pentium® 4 processor Extreme Edition/Intel® Pentium® 4 processor/ Intel® Celeron® processor in the LGA 775 package
      (Go to GIGABYTE's website for the latest CPU support list.)
    2. L2 cache varies with CPU
    3. 1600 (O.C.)/1333/1066/800 MHz FSB
  • Chipset
    Chipset
    1. North Bridge: Intel® P35 Chipset
    2. South Bridge: Intel® ICH9R
  • Memory
    Memory
    1. 4 x 1.8V DDR2 DIMM sockets supporting up to 8 GB of system memory
    2. Dual channel memory architecture
    3. Support for DDR2 1200 (O.C.)/1066/800/667 MHz memory modules
    Please refer "Memory Support List" for memory support information.
  • Audio
    Audio
    1. Realtek ALC889A codec
    2. High Definition Audio
    3. 2/4/5.1/7.1-channel
    4. Support for S/PDIF In/Out
    5. Support for CD In
  • LAN
    LAN
    1. Realtek 8111B chip (10/100/1000 Mbit)
  • Expansion Slots
    Expansion Slots
    1. 2 x PCI Express x16 slots (The PCIE_16_1 slot supports x16; the PCIE_16_2 supports x4.)
    2. 3 x PCI Express x1 slots (share with the PCIE_16_2 slot)
    3. 2 x PCI slots
  • Storage Interface
    Storage Interface
    South Bridge:
    1. 6 x SATA 3Gb/s connectors (SATAII0, SATAII1, SATAII2, SATAII3, SATAII4, SATAII5) supporting up to 6 SATA 3Gb/s devices
    2. Support for SATA RAID 0, RAID 1, RAID 5, and RAID 10
    GIGABYTE SATA2 chip:
    1. 1 x IDE connector supporting ATA-133/100/66/33 and up to 2 IDE devices
    2. 2 x SATA 3Gb/s connectors (GSATAII0, GSATAII1) supporting up to 2 SATA 3Gb/s devices
    3. Support for SATA RAID 0, RAID 1, and JBOD
    iTE IT8718 chip:
    1. 1 x floppy disk drive connector supporting up to 1 floppy disk drive
  • USB
    USB
    1. Integrated in the South Bridge
    2. Up to 12 USB 2.0/1.1 ports (8 on the back panel, 4 via the USB brackets connected to the internal USB headers)
  • IEEE 1394
    IEEE 1394
    1. T.I. TSB43AB23 chip
    2. Up to 3 IEEE 1394a ports (2 on the back panel, 1 via the IEEE 1394 bracket connected to the internal IEEE 1394 header)
  • Internal I/O Connectors
    Internal I/O Connectors
    1. 1 x 24-pin ATX main power connector
    2. 1 x 8-pin ATX 12V power connector
    3. 1 x 4-pin PCIe 12V power connector
    4. 1 x floppy disk drive connector
    5. 1 x IDE connector
    6. 8 x SATA 3Gb/s connectors
    7. 1 x CPU fan header
    8. 2 x system fan headers
    9. 1 x power fan header
    10. 1 x North Bridge fan header
    11. 1 x front panel header
    12. 1 x front panel audio header
    13. 1 x CD In connector
    14. 1 x S/PDIF In header
    15. 1 x S/PDIF Out header
    16. 2 x USB 2.0/1.1 headers
    17. 1 x IEEE 1394a header
    18. 1 x parallel port header
    19. 1 x serial port header
    20. 1 x power LED header
    21. 1 x chassis intrusion header
  • Back Panel Connectors
    Back Panel Connectors
    1. 1 x PS/2 keyboard port
    2. 1 x PS/2 mouse port
    3. 1 x coaxial S/PDIF Out connector
    4. 1 x optical S/PDIF Out connector
    5. 8 x USB 2.0/1.1 ports
    6. 2 x IEEE 1394a ports
    7. 1 x RJ-45 port
    8. 6 x audio jacks (Center/Subwoofer Speaker Out/Rear Speaker Out/Side Speaker Out/Line In/Line Out/Microphone)
  • I/O Controller
    I/O Controller
    1. iTE IT8718 chip
  • H/W Monitoring
    H/W Monitoring
    1. System voltage detection
    2. CPU/System temperature detection
    3. CPU/System/Power fan speed detection
    4. CPU overheating warning
    5. CPU/System/Power fan fail warning
    6. CPU fan speed control
  • BIOS
    BIOS
    1. Supports DualBIOS Plus
    2. 2 x 8 Mbit flash ROM
    3. Use of licensed AWARD BIOS
    4. PnP 1.0a, DMI 2.0, SM BIOS 2.3, ACPI 1.0b.
  • Unique Features
    Unique Features
    1. Support for @BIOS
    2. Support for Download Center
    3. Support for Q-Flash
    4. Support for EasyTune
    5. Support for Xpress Install
    6. Support for Xpress Recovery2
  • Form Factor
    Form Factor
    1. ATX (305 x 244mm)
  • Overclocking
    Overclocking
    Voltage adjustments in BIOS Setup (CPU/DDR2/PCIe/FSB/(G)MCH) Allow you to:
    1. Increase CPU voltage
    2. Increase DDR2 voltage by 0.05V to 1.55V with 0.05V increment
    3. Increase PCIe voltage by 0.05V to 0.35V with 0.05V increment
    4. Increase FSB voltage by 0.05V to 0.35V with 0.05V increment
    5. Increase (G)MCH voltage by 0.025V to 0.375V with 0.025V increment
    Frequency adjustments in BIOS Setup (CPU/DDR2/PCIe) allow you to:
    1. Adjust CPU host frequency from 100 MHz to 700 MHz with 1 MHz increment
    2. Adjust DDR2 frequency
    3. Adjust PCI Express x16 frequency from 90 MHz to 150 MHz with 1 MHz increment
  • Remark
    Remark
    1. Due to different Linux support condition provided by chipset vendors, please download Linux driver from chipset vendors' website or 3rd party website.
    2. Due to most hardware/software vendors no longer offer support for Win9X/ME. If some vendors still has Win9X/ME drivers available, we will publish on website.
    3. Duo to chipset limitation, Intel ICH9R RAID driver does not support Windows 2000 operating system.

* The terms HDMI, HDMI High-Definition Multimedia Interface, HDMI Trade dress and the HDMI Logos are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.
* The entire materials provided herein are for reference only. GIGABYTE reserves the right to modify or revise the content at anytime without prior notice.
* Advertised performance is based on maximum theoretical interface values from respective Chipset vendors or organization who defined the interface specification. Actual performance may vary by system configuration.
* All trademarks and logos are the properties of their respective holders.
* Due to standard PC architecture, a certain amount of memory is reserved for system usage and therefore the actual memory size is less than the stated amount.