GA-EP45-DS3P (rev. 1.0)
Specificaties
Intel® P45 + ICH10R Chipset
- CPUCPU
- Support for an Intel® Core™ 2 Extreme processor/
Intel® Core™ 2 Quad processor/Intel® Core™ 2 Duo processor/
Intel® Pentium® Dual-Core processor/Intel® Celeron® processor
in the LGA 775 package
(Note) This motherboard is designed with VRD11.1 power phase, and cannot be compatible with VRD10 designed CPU. Please refer to "CPU Support List" for details. - L2 cache varies with CPU
- Support for an Intel® Core™ 2 Extreme processor/
Intel® Core™ 2 Quad processor/Intel® Core™ 2 Duo processor/
Intel® Pentium® Dual-Core processor/Intel® Celeron® processor
in the LGA 775 package
- Front Side BusFront Side Bus
- 1600/1333/1066/800 MHz FSB
- ChipsetChipset
- North Bridge: Intel® P45 Express Chipset
- South Bridge: Intel® ICH10R
- MemoryMemory
- 4 x 1.8V DDR2 DIMM sockets supporting up to 16 GB of system memory
- Dual channel memory architecture
- Support for DDR2 1333+/1066/800/667 MHz memory modules
(Refer to Memory support list for more information)
- AudioAudio
- Realtek ALC889A codec
- High Definition Audio
- 2/4/5.1/7.1-channel
- Support for Dolby Home Theater
- Support for S/PDIF In/Out
- Support for CD In
- LANLAN
- 2 x Realtek 8111C chips (10/100/1000 Mbit)
- Support for Teaming
- Expansion SlotsExpansion Slots
- 1 x PCI Express x16 slot, running at x16
- 1 x PCI Express x16 slot, running at x8
(The PCIEx16 and PCIEx8 slots support ATI CrossFireX technology and conform to PCI Express 2.0 standard.) - 1 x PCI Express x4 slot
- 3 x PCI Express x1 slot
- 1 x PCI slots
- Storage InterfaceStorage InterfaceSouth Bridge:
- 6 x SATA 3Gb/s connectors (SATAII0, SATAII1, SATAII2, SATAII3, SATAII4, SATAII5) supporting up to 6 SATA 3Gb/s devices
- Support for SATA RAID 0, RAID 1, RAID 5, and RAID 10
- 1 x IDE connector supporting ATA-133/100/66/33 and up to 2 IDE devices
- 1 x floppy disk drive connector supporting up to 1 floppy disk drive
- USBUSB
- Integrated in the South Bridge
- Up to 12 USB 2.0/1.1 ports
(8 on the back panel, 4 via the USB brackets connected to the internal USB headers)
- IEEE 1394aIEEE 1394a
- T.I. TSB43AB23 chip
- Up to 3 IEEE 1394a ports
(2 on the back panel, 1 via the IEEE 1394a bracket connected to the internal IEEE 1394a header)
- Internal I/O ConnectorsInternal I/O Connectors
- 1 x 24-pin ATX main power connector
- 1 x 8-pin ATX 12V power connector
- 1 x floppy disk drive connector
- 1 x IDE connector
- 6 x SATA 3Gb/s connectors
- 1 x CPU fan header
- 3 x system fan headers
- 1 x power fan header
- 1 x North Bridge fan header
- 1 x front panel header
- 1 x front panel audio header
- 1 x CD In connector
- 1 x S/PDIF In header
- 1 x S/PDIF Out header
- 2 x USB 2.0/1.1 headers
- 1 x IEEE 1394a header
- 1 x serial port header
- 1 x power LED header
- 1 x chassis intrusion header
- 1 x power switch
- 1 x reset switch
- 1 x clearing CMOS switch
- Back Panel ConnectorsBack Panel Connectors
- 1 x PS/2 mouse port
- 1 x PS/2 keyboard/mouse port
- 1 x optical S/PDIF Out connector
- 1 x coaxial S/PDIF Out connector
- 8 x USB 2.0/1.1 ports
- 2 x IEEE 1394a ports
- 2 x RJ-45 ports
- 6 x audio jacks (Center/Subwoofer Speaker Out/Rear Speaker Out/Side Speaker Out/Line In/Line Out/Microphone)
- I/O ControllerI/O Controller
- iTE IT8720 chip
- H/W MonitoringH/W Monitoring
- System voltage detection
- CPU/System temperature detection
- CPU/System/Power fan speed detection
- CPU overheating warning
- CPU/System/Power fan fail warning
- CPU/System fan speed control
- BIOSBIOS
- 2 x 8 Mbit flash
- Use of licensed AWARD BIOS
- Support for Dual BIOS™
- PnP 1.0a, DMI 2.0, SM BIOS 2.4, ACPI 1.0b
- Unique FeaturesUnique Features
- Support for @BIOS
- Support for Q-Flash
- Support for Dual BIOS
- Support for Download Center
- Support for Xpress Install
- Support for Xpress Recovery2
- Support for EasyTune
- Support for Dynamic Energy Saver Advanced
- Support for Time Repair
- Support for Q-Share
- Bundle SoftwareBundle Software
- Norton Internet Security (OEM version)
- Operating SystemOperating System
- Support for Microsoft Windows Vista/XP
- Form FactorForm Factor
- ATX Form Factor; 30.5cm x 24.4cm
- NoteNote
- To enable Teaming or Bonding (IEEE 802.3ad Link Aggregation) feature, it is required the connected network switch or router device supports 802.3.ad LACP function.
Please refer to your network switch or router device manual for further details.
- To enable Teaming or Bonding (IEEE 802.3ad Link Aggregation) feature, it is required the connected network switch or router device supports 802.3.ad LACP function.
- RemarkRemark
- Due to different Linux support condition provided by chipset vendors, please download Linux driver from chipset vendors' website or 3rd party website.
- Most hardware/software vendors may no longer offer drivers to support Win9X/ME/2000/XP SP1/SP2. If drivers are available from the vendors, we will update them on the GIGABYTE website.

* De termen HDMI, HDMI High-Definition Multimedia Interface, HDMI Trade dress en de HDMI logo's zijn handelsmerken of gedeponeerde handelsmerken van HDMI Licensing Administrator, Inc.
* Alle materialen zijn alleen voor uw referenctie. GIGABYTE behoudt zich het recht om zonder aankondiging de inhoud te wijzigen of te herzien.
* Alle handelsmerken en logo's zijn eigendom van hun respectieve houders.
* Door de standaard PC-architectuur, wordt een bepaalde hoeveelheid geheugen gereserveerd voor gebruik van het systeem en dus is de werkelijke geheugengrootte kleiner dan de aangegeven hoeveelheid.
