GA-X38T-DQ6 (rev. 1.1)
Specification
Intel® X38 + ICH9R Chipset
- CPUCPU
- Support for an Intel® Core™ 2 Extreme processor/ Intel® Core™ 2 Quad processor/ Intel® Core™ 2 Duo processor/ Intel® Pentium processor Extreme Edition/ Intel® Pentium D processor/ Intel® Pentium 4 processor Extreme Edition/ Intel® Pentium 4 processor in the LGA 775 package
- Support for Intel® Hyper-Threading Technology
- Support 1600/1333/1066/800 MHz FSB
- ChipsetChipset
- Northbridge: Intel® X38 Express Chipset
- Southbridge: Intel® ICH9R
- T.I IEEE 1394 Controller
- Gigabit Lan Controller
- 8 Channels ALC889A Audio controller
- MemoryMemory
- 4 x 1.5V DDR3 DIMM sockets supporting up to 8 GB of system memory
- Dual channel memory architecture
- Support for DDR3 1800(O.C.)/1600/1333/1066/800MHz, non ECC memory modules
- Support Intel® XMP Memory controller
- AudioAudio
- Realtek ALC889A codec
- High Definition Audio
- 2/4/5.1/7.1-channel
- Support for DTS (dts NEO:PC)
- Support for S/PDIF In/Out
- Support for CD In
- LANLAN
- 2 x Realtek 8111B chips (10/100/1000 Mbit)
- Expansion SlotsExpansion Slots
- 2 x PCI Express 2.0 x16 slots (The PCIE_16_1 slot supports x16; the PCIE_16_2 supports x16.)
- 3 x PCI Express x1 slots (share with the PCIE_16_2 slot)
- 2 x PCI slots
- Storage InterfaceStorage InterfaceSouth Bridge:
- 6 x SATA 3Gb/s connectors (SATAII0, SATAII1, SATAII2, SATAII3, SATAII4, SATAII5) supporting up to 6 SATA 3Gb/s devices
- Support for SATA RAID 0, RAID 1, RAID 5, and RAID 10
- 1 x IDE connector supporting ATA-133/100/66/33 and up to 2 IDE devices
- 2 x SATA 3Gb/s connectors (GSATAIIA, GSATAIIB) supporting up to 2 SATA 3Gb/s devices
- Support for SATA RAID 0, RAID 1, and JBOD
- 1 x floppy disk drive connector supporting up to 1 floppy disk drive
- USBUSB
- Integrated in the South Bridge
- Up to 12 USB 2.0/1.1 ports (8 on the back panel, 4 via the USB brackets connected to the internal USB headers)
- IEEE 1394IEEE 1394
- T.I. TSB43AB23 chip
- Up to 3 IEEE 1394a ports (2 on the back panel, 1 via the IEEE 1394a bracket connected to the internal IEEE 1394a header)
- Internal I/O ConnectorsInternal I/O Connectors
- 1 x 24-pin ATX main power connector
- 1 x 8-pin ATX 12V power connector
- 1 x 4-pin PCIe 12V power connector
- 1 x floppy disk drive connector
- 1 x IDE connector
- 8 x SATA 3Gb/s connectors
- 1 x CPU fan header
- 2 x system fan headers
- 1 x power fan header
- 1 x North Bridge fan header
- 1 x front panel header
- 1 x front panel audio header
- 1 x CD In connector
- 1 x S/PDIF In header
- 1 x S/PDIF Out header
- 2 x USB 2.0/1.1 headers
- 1 x IEEE 1394a headers
- 1 x parallel port header
- 1 x Trusted Platform Module (TPM) header
- 1 x serial port header
- 1 x power LED header
- 1 x chassis intrusion header
- Back Panel ConnectorsBack Panel Connectors
- 1 x PS/2 keyboard port
- 1 x PS/2 mouse port
- 1 x coaxial S/PDIF Out connector
- 1 x optical S/PDIF Out connector
- 8 x USB 2.0/1.1 ports
- 2 x IEEE 1394a ports
- 2 x RJ-45 port
- 6 x audio jacks (Center/Subwoofer Speaker Out/Rear Speaker Out/Side Speaker Out/Line In/Line Out/Microphone)
- I/O ControllerI/O Controller
- iTE IT8718 chip
- H/W MonitoringH/W Monitoring
- System voltage detection
- CPU/System temperature detection
- CPU/System/Power fan speed detection
- CPU overheating warning
- CPU/System/Power fan fail warning
- CPU fan speed control
- BIOSBIOS
- 2 x 8 Mbit flash
- Use of licensed AWARD BIOS
- Support for Dual BIOSTM
- PnP 1.0a, DMI 2.0, SM BIOS 2.4, ACPI 1.0b
- Form FactorForm Factor
- ATX form factor, 305 x 244mm
- Other FeaturesOther Features
- Ultra Durable 2 Motherboard
- All copper Silent Pipe and Crazy Cool
- All Japanese manufactured solid capacitors with SMD (Surface Mount Device)
- Over-clocking Enhanced
- Support for @BIOS
- Support for Download Center
- Support for Q-Flash
- Support for EasyTune
- Support for Xpress Install
- Support for Xpress Recovery2
- NoteNote
- To enable Teaming or Bonding (IEEE 802.3ad Link Aggregation) feature, it is required the connected network switch or router device supports 802.3.ad LACP function.
Please refer to your network switch or router device manual for further details.
- To enable Teaming or Bonding (IEEE 802.3ad Link Aggregation) feature, it is required the connected network switch or router device supports 802.3.ad LACP function.
- RemarkRemark
- Due to different Linux support condition provided by chipset vendors, please download Linux driver from chipset vendors' website or 3rd party website.
- Due to most hardware/software vendors no longer offer support for Win9X/ME. If some vendors still has Win9X/ME drivers available, we will publish on website.
- Duo to chipset limitation, Intel ICH9R RAID driver does not support Windows 2000 operating system.
* The terms HDMI, HDMI High-Definition Multimedia Interface, HDMI Trade dress and the HDMI Logos are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.
* The entire materials provided herein are for reference only. GIGABYTE reserves the right to modify or revise the content at anytime without prior notice.
* Advertised performance is based on maximum theoretical interface values from respective Chipset vendors or organization who defined the interface specification. Actual performance may vary by system configuration.
* All trademarks and logos are the properties of their respective holders.
* Due to standard PC architecture, a certain amount of memory is reserved for system usage and therefore the actual memory size is less than the stated amount.