Solusi
Seek Solutions & Frequently Asked Questions (FAQ)
Jun 15, 2013
The setup screen go blank when install the drivers with driver CD ( NVCD version 1.0) for GA-7NNXP, GA-7NNXPV, GA-7N400 Pro, GA-7N400V Pro.
Here are two ways for solving the issue.
- Please download the patch file from the"Driver" section of this web-page. The name of the patch file is NVCD.exe. Save the patch file to your floppy or flash disk.
- For the system to be setup. Put the Driver CD (NVCD) into the CD_ROM. Close any tasks initiated by the auto-execution program in Driver CD.
- Insert the floppy or flash disk and execute the patch file, NVCD.exe. The patch file will initiate the installation process without run into the same issue.
-
Solution 2. Install the driver manually
- For the system to be setup. Put the Driver CD (NVCD) into the CD_ROM. Close any tasks initiated by the auto-execution program in Driver CD.
-
Please go through the following folders and execute the installation program of chipset drivers
-
Chipset > sys_drv > winxp,win2k, or win98 > setup.exe
-
For 7NNXPV and 7N400V Pro, please install the VGA drivers in the following folder.
-
Chipset > nvga > win2k or win9x > setup.exe
-
For USB2.0 driver, please execute the installation program in the following folder.
-
Chipset >nusb > NUSB.exe
-
Chipset >nusb > win9x_me > setup.exe
-
For Network drivers, please execute the installation program in the following folder.
-
Network > Intel > win9x_me > Setup562.exe
-
For Audio drivers, please execute the installation program in the following folder.
-
Audio > Realtek > Setup.exe
