Solusi
Seek Solutions & Frequently Asked Questions (FAQ)
May 1, 2013
Can not install Win 2000 with TekramDC-390U2W SCSI CARD ?
Please refer to the following installation steps :
- Download the latest driver and bios version 3.23 of Tekram DC-390U2W or later from Tekram's web site. ( http: www.tekram.com.tw )
- Flash its bios according to the instruction on Tekram's website and reboot. Press F2 or F6 to enter SCSI bios setting during POST.
- Press Enter, then look for "FUNTION SELECTION" item, choose " SET DEVICES OPTIONS " !
-
Please check and make sure that option " SEND START UNIT COMMAND " of the corresponding channel is set to YES.
Example: If your SCSI HDD install on Channel 0, pls correspond the third option "send start unit command" and set it to Yes.
- Save and exit the bios setting, then reboot. Starting install Win2000; do not press F6 to specify this Tekram SCSI controller, just press enter to continue installation.
