\Hỗ trợ\Consumer\Câu hỏi thường gặp\
    Các giải pháp
    Các giải pháp

    Tìm kiếm giải pháp & Câu hỏi thường gặp (FAQ)

    Aug 10, 2012
    Does it support AHCI function? If so, how to run it with Windows XP?

    Yes, it supports AHCI. Please follow the instruction below:
    1. Update BIOS to latest version and Load Optimized.
    2. Go to BIOS setting > [Integrated Peripherals] > [SATA AHCI Mode] and select [AHCI].
    3. Copy F6 preinstall driver to a floppy disk from either driver DVD or driver page. If you use driver DVD, you can find driver in this file directory: \BootDrv\iRST\32Bit or 64Bit.
    4. During Windows XP installation procedure, press [F6] when you see this message: "Press F6 if you need to install a 3rd party SCSI or RAID driver".
    5. Then press [S] to enter driver selection page.
    6. When you see the following screen, please select [Intel(R) Desktop/Workstation/Server Express Chipset SATA AHCI Controller] and press [Enter].

    7. Press [Enter] when you see driver confirmation page and it will load AHCI driver from floppy disk to proceed Windows installation.
    GIGABYTE Control Center >
    Tải xuống hình nền >

    Tạo ra trải nghiệm hoàn toàn mới