MZ33-CP0

Rev. 1.x

Motherboard - AMD EPYC™ 9004 - E-ATX UP

Single AMD EPYC™ 9004 Series Processors
12-Channel DDR5 RDIMM, 16 x DIMMs
2 x 1Gb/s LAN ports via Intel^® I210-AT
4 x MCIO 8i connectors with PCIe Gen5 x8 interface
2 x MCIO 8i connectors with PCIe Gen4 x8 or SATA interface
1 x M.2 slot with PCIe Gen3 x4 interface
4 x PCIe Gen5/Gen4 x16 expansion slots
1 x OCP NIC 3.0 PCIe Gen5 x16 slot

Quick Shipping See More Models More ready-to-ship models in the MZ33 series. MZ33-AR0

Get a Quote

So sánh sản

Get a Quote

* The entire materials provided herein are for reference only. GIGABYTE reserves the right to modify or revise the content at anytime without prior notice.
* Advertised performance is based on maximum theoretical interface values from respective Chipset vendors or organization who defined the interface specification. Actual performance may vary by system configuration.
* All trademarks and logos are the properties of their respective holders.
* Due to standard PC architecture, a certain amount of memory is reserved for system usage and therefore the actual memory size is less than the stated amount.

SPECIFICATIONS

Form Factor (WxD, mm)

E-ATX
304.8 x 330.2

CPU

AMD EPYC™ 9005 Series Processors^[1]
AMD EPYC™ 9004 Series Processors

Single processor, cTDP up to 400W

^[1]To support EPYC 9005 series processors, CPLD firmware version R92 is required. Please verify the CPLD firmware version through the BMC WebUI and contact technical support if a firmware update is needed.

Socket

1 x LGA 6096
Socket SP5

Chipset

System on Chip

Memory

16 x DIMM slots
DDR5 memory supported
12-Channel memory architecture

AMD EPYC™ 9005:
RDIMM: Up to 4800 MT/s (1DPC)
RDIMM: Up to 4400 MT/s (1R 2DPC), 4000 MT/s (2R 2DPC)

AMD EPYC™ 9004:
RDIMM: Up to 4800 MT/s (1DPC), 3600 MT/s (2DPC)

LAN

2 x 1Gb/s LAN (2 x Intel^® I210-AT)
- Support NCSI function

1 x 10/100/1000 Mbps Management LAN

Video

Integrated in Aspeed^® AST2600
- 1 x Mini-DP

Audio

N/A

Storage Interface

MCIO:
4 x MCIO 8i for 8 x Gen5 NVMe
2 x MCIO 8i for 4 x Gen4 NVMe or 16 x SATA 6Gb/s

M.2:
1 x M.2 (2280/22110), PCIe Gen3 x4

RAID

N/A

PCIe Expansion Slots

Slot_6: PCIe x16 (Gen5 x16)
Slot_4: PCIe x16 (Gen5 x16)
Slot_2: PCIe x16 (Gen5 x16)
Slot_1: PCIe x16 (Gen4 x16)

1 x OCP NIC 3.0 (Gen5 x16)
- Supports NCSI function

4 x MCIO 8i (PCIe Gen5 x8)^[1]
2 x MCIO 8i (PCIe Gen4 x8 or SATA)

^[1]Please refer to the optional parts for qualified cables to ensure Gen5 signal quality.

Internal I/O

1 x 24-pin ATX main power connector
2 x 8-pin ATX 12V power connectors
1 x 6-pin ATX 12V power connector
1 x 4-pin 12V standby power connector
1 x CPU fan header
5 x System fan headers
1 x USB 3.2 Gen1 x2 header
1 x USB 2.0 x2 header
1 x M.2 slot
6 x MCIO 8i connectors
1 x Front panel header
1 x Backplane board header
1 x PMBus header
1 x IPMB header
1 x TPM header

Rear I/O

2 x USB 3.2 Gen1 ports (Type-A)
1 x Mini-DP
2 x RJ45 ports
1 x MLAN port
1 x ID button with LED

Security Modules

1 x TPM header with SPI interface
- Optional TPM2.0 kit: CTM010

OS Supported

Please refer to OS compatibility table in support page

Board Management

Aspeed^® AST2600 Baseboard Management Controller
GIGABYTE Management Console web interface

Dashboard
HTML5 KVM
Sensor Monitor (Voltage, RPM, Temperature, CPU Status …etc.)
Sensor Reading History Data
FRU Information
SEL Log in Linear Storage / Circular Storage Policy
Hardware Inventory
Fan Profile
System Firewall
Power Consumption
Power Control
Advanced power capping
LDAP / AD / RADIUS Support
Backup & Restore Configuration
Remote BIOS/BMC/CPLD Update
Event Log Filter
User Management
Media Redirection Settings
PAM Order Settings
SSL Settings
SMTP Settings

PSU Connectors

1 x 24-pin ATX main power connector
2 x 8-pin ATX 12V power connectors
1 x 6-pin ATX 12V power connector
1 x 4-pin 12V standby power connector

Operating Properties

Operating temperature: 10°C to 40°C
Operating humidity: 8-80% (non-condensing)
Non-operating temperature: -40°C to 60°C
Non-operating humidity: 20%-95% (non-condensing)

Retail Packaging Content

1 x MZ33-CP0
1 x I/O shield
1 x Quick start guide
1 x MCIO 8i to 8 x SATA 6Gb/s cable (600mm)

Single Box dimensions: 409 x 355 x 78 mm
Carton dimensions: 729 x 415 x 432 mm
Quantity: 10 x single boxes in one carton

Bulk Packaging Content

10 x MZ33-CP0
10 x I/O shields

Carton dimensions: 600 x 473 x 517 mm

Reference Numbers

Retail: 9MZ33CP0MR-000-1*
Bulk: 9MZ33CP0NR-000-1*

Part Numbers:

- I/O shield: 12AIO-MS33CP-00R
- MCIO 8i to 8 x SATA cable (600mm): 25CF9-600721-M0R

Optional parts:

- MCIO 8i to 2 x MCIO 4i cable (550mm): 25CF9-550700-A4R

SUPPORT

Tải về

Driver
BIOS
Tiện ích
Firmware

Hướng dẫn
Support List

Online Support

Driver

BIOS

Tiện ích

Firmware

QVL

All
All
Windows Server 2022
Windows Server 2019

Chipset

Phiên bản

Kích cở

Ngày

Chipset driver for AMD EPYC 9004 series processors

Version : 4.06.27.500

16.58 MB

Nov 11, 2022

MZ33-CP0

SPECIFICATIONS

SUPPORT

RESOURCES

MZ33-CP0 (Rev. 1.x)