Dimensions (WxHxD, mm)
2U 4-Node - Rear access
440 x 87.5 x 877
CPU
Intel® Xeon® 6 Processors
- Intel® Xeon® 6700-Series Processors
- Intel® Xeon® 6500-Series Processors
Dual processor per node, TDP up to 300W at 35°C ambient
- No OCP cards at 35°C ambient, TDP up to 350W
- With OCP cards at 30°C ambient, TDP up to 350W
[Note] If only 1 CPU is installed, some PCIe or memory functions might be unavailable.
Socket
8 x LGA 4710
Socket E2
Memory
64 x DIMM slots
DDR5 memory supported
8-Channel memory per processor
MRDIMM supported [1]
RDIMM: Up to 6400 MT/s
MRDIMM: Up to 8000 MT/s
[1] MRDIMMs are only supported with Intel® Xeon® 6 Processors with P-cores.
LAN
Rear (I/O board - CLBH160 x 4):
8 x 1Gb/s LAN (4 x Intel® I350-AM2)
- Support NCSI function
4 x 10/100/1000 Mbps Management LAN [1]
[1] Spanning Tree Protocol (STP) must be enabled on LAN switches when using a ring topology.
Video
Integrated in ASPEED® AST2600 x 4
- 4 x Mini-DP
Storage
Front hot-swap:
24 x 2.5" Gen5 NVMe/SATA/SAS-4 [1]
- (NVMe & SATA from CPU_1)
Optional internal M.2 (CMTP160 x 4):
4 x M.2 (2260/2280/22110), PCIe Gen4 x4, from CPU_1
[1] SAS card is required to support SAS drives.
SAS
Require SAS add-in cards
RAID
Require RAID add-in cards
Onboard VROC key headers
PCIe Expansion Slots
Riser Card CRSH01R x 4:
- 4 x LP x16 (Gen5 x16), from CPU_0
4 x OCP NIC 3.0 (Gen5 x16), from CPU_0
- Support NCSI function
Front I/O
4 x Power buttons with LED
4 x ID buttons with LED
4 x Reset buttons
4 x System status LEDs
1 x CMC status LED
1 x CMC reset button
Rear I/O
I/O board - CLBH160 x 4:
8 x USB 3.2 Gen1 ports (Type-A)
4 x Mini-DP
8 x RJ45 ports
4 x MLAN ports
4 x System status LEDs
Backplane Board
Speed and bandwidth:
PCIe Gen5 x4 or SATA 6Gb/s or SAS-4 24Gb/s
Security Modules
4 x TPM headers with SPI interface
-
Optional TPM2.0 kit:
CTM012
4 x PRoT connectors
(only enabled on RoT SKU)
Power Supply
Dual 3000W 80 PLUS Titanium redundant power supply [1]
AC Input:
- 100-127V~/ 16A, 50/60Hz
- 200-207V~/ 16A, 50/60Hz
- 208-240V~/ 16A, 50/60Hz
DC Input: (Only for China)
- 240Vdc/ 16A
DC Output:
- Max 1200W/ 100-127V~
+12.2V/ 98.36A
+12.2Vsb/ 3A
- Max 2600W/ 200-207V~
+12.2V/ 213A
+12.2Vsb/ 3A
- Max 3000W/ 208-240V~ or 240Vdc Input
+12.2V/ 245.9A
+12.2Vsb/ 3A
[1] The system power supply requires C19 power cord.
System Management
ASPEED
® AST2600 Baseboard Management Controller
ASPEED
® AST2620 Chassis Management Controller
GIGABYTE Management Console web interface
- Dashboard
- HTML5 KVM
- Sensor Monitor (Voltage, RPM, Temperature, CPU Status …etc.)
- Sensor Reading History Data
- FRU Information
- SEL Log in Linear Storage / Circular Storage Policy
- Hardware Inventory
- Fan Profile
- System Firewall
- Power Consumption
- Power Control
- Advanced power capping
- LDAP / AD / RADIUS Support
- Backup & Restore Configuration
- Remote BIOS/BMC/CPLD Update
- Event Log Filter
- User Management
- Media Redirection Settings
- PAM Order Settings
- SSL Settings
- SMTP Settings
OS Compatibility
Please refer to OS compatibility table in support page
Additional certifications:
Windows Server 2025
System Fans
4 x 80x80x80mm (16,500rpm)
Operating Properties
Operating temperature: 10°C to 35°C
Operating humidity: 8%-80% (non-condensing)
Non-operating temperature: -40°C to 60°C
Non-operating humidity: 20%-95% (non-condensing)
[Note] To ensure system stability and prevent condensation, when the relative humidity exceeds 50%, the coolant inlet temperature must be higher than the dry-bulb temperature and it should not exceed 40°C.
Packaging Dimensions
1190 x 711 x 423 mm
Packaging Content
1 x H274-S60-LAW1
8 x CoolIT CPU cold plate loops
1 x Mini-DP to D-Sub cable
16 x Carriers
1 x 3-Section Rail kit
Part Numbers
- Barebone with cold plates: 6NH274S60DR000LAW1*
- Barebone without cold plates: 6NH274S60DZ000LAW1*
- Motherboard: 9MS64HD0UR-000*
- 3-Section Rail kit: 25HB2-A66125-K0R
- CoolIT CPU cold plate loop: 25ST7-10000E-C4R
- Front panel board - CFPH004: 9CFPH004NR-00*
- Backplane board - CBPH0O8: 9CBPH0O8NR-00*
- Fan module: 25ST2-888020-S1R
- Riser card - CRSH01R: 9CRSH01RNR-00*
- I/O board - CLBH160: 9CLBH160NR-00*
- Mini-DP to D-Sub cable: 25CRN-200801-K1R
- Power supply: 25EP0-23000V-L0S
Optional parts:
- C19 power cord 125V/15A (US): 25CP1-018000-Q0R
- C19 power cord 250V/16A (EU): 25CP3-01830H-Q0R
- C19 power cord 125V/15A (JP): 25CPA-01830B-Q0R
- M.2 riser card - CMTP160: 9CMTP160NR-00*
- CoolIT leak sensor board: 6NH274S60S1000LAW10 (QPA:4)
- RMA packaging: 6NH274S60SR-RMA-L100
* Todos los materiales aquí provistos son solo para referencia. GIGABYTE se reserva el derecho de modificar o revisar el contenido a cualquier hora sin aviso alguno.
* Todas las marcas y logos son propiedad de sus propios dueños.
* Debido a la arquitectura estándar de la PC, cierta cantidad de memoria es reservada para uso del sistema y actualmente la memoria disponible es menor a la mencionada.
