R184-A92- LAJ1

1U
438 x 43.5 x 815

MA94-FS0

Intel^® Xeon^® 6 Processors
- Intel^® Xeon^® 6900-Series Processors

Dual processor, TDP up to 500W

^[Note] If only 1 CPU is installed, some PCIe or memory functions might be unavailable.

2 x LGA 7529
Socket BR

System on Chip

24 x DIMM slots
DDR5 memory supported
12-Channel memory per processor
MRDIMM supported ^[1]
RDIMM: Up to 6400 MT/s
MRDIMM: Up to 8800 MT/s

^[1] MRDIMMs are only supported with Intel^® Xeon^® 6 Processors with P-cores.

Rear (I/O board - CDCR010):
2 x 1Gb/s LAN (1 x Intel^® I350-AM2)
- Support NCSI function

1 x 10/100/1000 Mbps Management LAN

Integrated in ASPEED^® AST2600
- 1 x Mini-DP

Front hot-swap:
12 x 2.5" Gen5 NVMe/SATA/SAS-4 ^[1]
- (6 x NVMe from CPU_0, 6 x NVMe from CPU_1)

Internal M.2:
2 x M.2 (2280/22110), PCIe Gen5 x4, from CPU_0

Internal M.2 (I/O board - CDCR010):
1 x M.2 (2280), PCIe Gen5 x2, from CPU_0

^[1] Storage card is required to support SATA and SAS drives.

Require SAS add-in cards

Require RAID add-in cards
Onboard VROC key header

Riser Card CRS101J:
- 1 x FHHL x16 (Gen5 x16), from CPU_0

1 x OCP NIC 3.0 (Gen5 x16), from CPU_0
- Supports NCSI function

1 x OCP NIC 3.0 (Gen5 x16), from CPU_1
- Supports NCSI function

^[Note] When NVIDIA BlueField^®-3 DPUs/SuperNICs or ConnectX^®-7 NICs are installed, the ambient temperature is limited to 30℃.

1 x USB 3.2 Gen1 port (Type-A)
1 x Power button with LED
1 x ID button with LED
1 x Reset button
2 x LAN activity LEDs
1 x Storage activity LED
1 x System status LED

I/O board - CDCR010:
2 x USB 3.2 Gen1 ports (Type-A)
1 x Mini-DP
2 x RJ45 ports
1 x MLAN port
1 x ID LED

Speed and bandwidth:
PCIe Gen5 x4 or SATA 6Gb/s or SAS-4 24Gb/s

1 x TPM header with SPI interface
- Optional TPM2.0 kit: CTM012

1 x PRoT connector (only enabled on RoT SKU)

1+1 2000W 80 PLUS Titanium redundant power supplies

AC Input:
- 100-127V~/ 13A, 50-60Hz
- 200-220V~/ 10A, 50-60Hz
- 220-240V~/ 10A, 50-60Hz

DC Input: (Only for China)
- 240Vdc/ 10A

DC Output:
- Max 1000W/ 100-127V~
+12.2V/ 82A
+12.2Vsb/ 3A
- Max 1800W/ 200-220V~
+12.2V/ 148A
+12.2Vsb/ 3A
- Max 2000W/ 220-240V~ or 240Vdc Input
+12.2V/ 164A
+12.2Vsb/ 3A

^[Note] GIGABYTE offers PSUs with various efficiency ratings and power outputs. Full redundancy may depend on your server configuration, and alternative PSU options may be needed. Please contact our sales representatives for the best power solution.

ASPEED^® AST2600 Baseboard Management Controller
GIGABYTE Management Console web interface

• Dashboard
• HTML5 KVM
• Sensor Monitor (Voltage, RPM, Temperature, CPU Status …etc.)
• Sensor Reading History Data
• FRU Information
• SEL Log in Linear Storage / Circular Storage Policy
• Hardware Inventory
• Fan Profile
• System Firewall
• Power Consumption
• Power Control
• Advanced power capping
• LDAP / AD / RADIUS Support
• Backup & Restore Configuration
• Remote BIOS/BMC/CPLD Update
• Event Log Filter
• User Management
• Media Redirection Settings
• PAM Order Settings
• SSL Settings
• SMTP Settings

Please refer to OS compatibility table in support page

Additional certifications:
Ubuntu 24.04 LTS

8 x 40x40x56mm (38,000rpm)

Operating temperature: 10°C to 35°C
Operating humidity: 8%-80% (non-condensing)
Non-operating temperature: -40°C to 60°C
Non-operating humidity: 20%-95% (non-condensing)

^[Note] To ensure system stability and prevent condensation, when the relative humidity exceeds 50%, the coolant inlet temperature must be higher than the dry-bulb temperature and it should not exceed 40°C.

1091 x 594 x 275 mm

1 x R184-A92-LAJ1
1 x CoolIT CPU cold plate loop
1 x Mini-DP to D-Sub cable
2 x Carriers
1 x 2-Section Rail kit

- Barebone w/ cold plates: 6NR184A92DR000LAJ1*
- Barebone w/o cold plates: 6NR184A92DZ000LAJ1*
- Motherboard: 9MA94FS0UR-000*
- 2-Section Rail kit (CMA not supported): 25HB2-3A0206-K0R
- CoolIT CPU cold plate loop: 25ST7-10000G-C4R
- M.2 heatsink (2280): 12SP2-080027-00R
- M.2 heatsink (22110): 12SP2-11000E-00R
- Front panel board - CFP1030: 9CFP1030NR-00*
- Backplane board - CBP10C2: 9CBP10C2NR-00*
- Fan module: 25ST2-40562O-D0R
- Riser card - CRS101J: 9CRS101JNR-00*
- I/O board with M.2 slot - CDCR010: 9CDCR010NR-00*
- Mini-DP to D-Sub cable: 25CRN-200801-K1R
- Power supply: 25EP0-22000Q-G1S

Optional parts:

- 3-Section Rail kit (Supports CMA): 25HB2-A56121-K0R
- Cable Management Arm: 25HB1-R18300-K0R