H263-S62- LAN1

2U 4-Node - Rear access
440 x 87.5 x 840

MS63-HD1

5th Generation Intel^® Xeon^® Scalable Processors
4th Generation Intel^® Xeon^® Scalable Processors
Intel^® Xeon^® CPU Max Series

Dual processor per node, TDP up to 385W

^[Note] If only 1 CPU is installed, some PCIe or memory functions might be unavailable.

8 x LGA 4677
Socket E

Intel^® C741

64 x DIMM slots
DDR5 memory supported
8-Channel memory architecture

5th Gen Intel^® Xeon^®:
RDIMM: Up to 5600 MT/s

4th Gen Intel^® Xeon^®:
RDIMM: Up to 4800 MT/s

Intel^® Xeon^® Max Series:
RDIMM: Up to 4800 MT/s

Rear:
4 x 10/100/1000 Mbps Management LAN
1 x CMC Management LAN <sup>[1]

[1]</sup> Please refer to optional parts for ring topology support.

^[Note] Spanning Tree Protocol (STP) must be enabled on LAN switches when using a ring topology.

Integrated in Aspeed^® AST2600 x 4
- 4 x VGA ports

Front hot-swap:
24 x 2.5" Gen4 NVMe/SATA/SAS ^[1]
- (NVMe from CPU_1)

Optional internal M.2 (CMTP061 x 4):
4 x M.2 (2280/22110), PCIe Gen4 x4, from CPU_1

^[1] SAS card is required to support SAS drives.

Require SAS add-in cards

Intel^® SATA RAID 0/1/10/5
Onboard VROC key header

Support optional RAID add-in cards

Riser Card CRSH01U x 4:
- 4 x LP x16 (Gen5 x16), from CPU_0

4 x OCP NIC 3.0 (Gen5 x16), from CPU_0
- Support NCSI function

4 x Power buttons with LED
4 x ID buttons with LED
4 x Reset buttons
4 x System status LEDs
1 x CMC status LED
1 x CMC reset button

8 x USB 3.2 Gen1 ports (Type-A)
4 x VGA ports
4 x MLAN ports
4 x ID buttons with LED
1 x CMC port

Speed and bandwidth:
PCIe Gen4 x4 or SATA 6Gb/s or SAS 12Gb/s

1 x TPM header with SPI interface
- Optional TPM2.0 kit: CTM010

Dual 2600W 80 PLUS Titanium redundant power supply ^[1]
Available for 2+1 redundant power supply configuration (optional)

AC Input:
- 100-127V~/ 15A, 50-60Hz
- 200-240V~/ 15A, 50-60Hz

DC Input: (Only for China)
- 240Vdc/ 15A

DC Output:
- Max 1000W/ 100-127V~
+12.2V/ 82A
+12.2Vsb/ 4.5A
- Max 2600W/ 200-240V~ or 240Vdc Input
+12.2V/ 213A
+12.2Vsb/ 4.5A

^[1] The system power supply requires C19 power cord.

Aspeed^® AST2600 Baseboard Management Controller
Aspeed^® AST2520 Chassis Management Controller
GIGABYTE Management Console web interface

• Dashboard
• HTML5 KVM
• Sensor Monitor (Voltage, RPM, Temperature, CPU Status …etc.)
• Sensor Reading History Data
• FRU Information
• SEL Log in Linear Storage / Circular Storage Policy
• Hardware Inventory
• Fan Profile
• System Firewall
• Power Consumption
• Power Control
• Advanced power capping
• LDAP / AD / RADIUS Support
• Backup & Restore Configuration
• Remote BIOS/BMC/CPLD Update
• Event Log Filter
• User Management
• Media Redirection Settings
• PAM Order Settings
• SSL Settings
• SMTP Settings

Please refer to OS compatibility table in support page

Additional certifications:
Windows Server 2022

4 x 80x80x38mm (18,300rpm)

Operating temperature: 10°C to 40°C
Operating humidity: 8-80% (non-condensing)
Non-operating temperature: -40°C to 60°C
Non-operating humidity: 20%-95% (non-condensing)

^[Note] To ensure system stability and prevent condensation, when the relative humidity exceeds 50%, the coolant inlet temperature must be higher than the dry-bulb temperature and it should not exceed 40°C.

Net Weight: 47.66 kg
Gross Weight: 49.96 kg

w/ cold plate loops: 1185 x 705 x 409 mm
w/o cold plate loops: 1176 x 709 x 322 mm

1 x H263-S62-LAN1
4 x CoolIT CPU cold plate loops
24 x Carriers
1 x 3-Section Rail kit

- Barebone w/ cold plates (5th/4th Gen): 6NH263S62DR000LBN1*
- Barebone w/ cold plates (4th Gen): 6NH263S62DR000LAN1*
- Barebone w/o cold plates (5th/4th Gen): 6NH263S62DZ000LBN1*
- Barebone w/o cold plates (4th Gen): 6NH263S62DZ000LAN1*
- Motherboard: 9MS63HD1UR-000*
- 3-Section Rail kit: 25HB2-A66125-K0R
- CoolIT CPU cold plate loop: 25ST7-100006-C4R
- Front panel board - CFPH004: 9CFPH004NR-00*
- Backplane board - CBPH7O1: 9CBPH7O1NR-00*
- Fan module: 25ST2-88382P-S1R
- Riser card - CRSH01U: 9CRSH01UNR-00*
- Power supply: 25EP0-226001-G1S

Optional parts:

- C19 power cord 125V/15A (US): 25CP1-018000-Q0R
- C19 power cord 250V/16A (EU): 25CP3-01830H-Q0R
- C19 power cord 125V/15A (JP): 25CPA-01830B-Q0R
- M.2 riser card - CMTP061: 9CMTP061NR-00*
- Ring topology kit (10-kit package): 6NH263S62S1000AAN11
- GIGABYTE CPU cold plate loop: 25H26-3S62000-E01X (QPA:4)
- GIGABYTE 2U4N Manifold: 25H27-3Z80000-E07X (1 set per rack)
- Motivair CPU cold plate loop: 25ST7-10000B-M4R (QPA:4)
- CoolIT leak sensor board: 6NH263S62S1000LAN11 (QPA:4)
- RMA packaging: 6NH263S62SR-RMA-L100