\지원\Consumer\FAQ\
솔루션
솔루션

솔루션 찾기 & FAQ

Mar 31, 2007
How do I install NUCD 3.3 on video card of N40/N52/N55 series?
Because of the issue with NUCD 3.3 Drivers CD, when you are faced with the problem of not being able to install the drivers by the original Installation screen. Please follow the procedure below which can still successfully install the graphics drivers:
  • Step 1: Found "Add hardware wizard": then Click "Next" button
    After installing the graphics card into your system, when booting into windows for the first time it will auto-detect new hardware and you will be prompted with a message box "New Hardware Found".



  • Step 2: Found New Hardware Wizard: Click "Next" button
    Please choose "Install from a list or specific location (Advanced)" and click "Next".


  • Step 3:Click "Next" button to install the driver
    Please check the"Search for the best driver in these location" and "Search removable media" box and then click "Next" to continue installation.(Please insert the driver CD: NUCD 3.3 bundled with your graphics card now.)
    P.S. When GIGABYTE graphic card Auto-run window show up, click "Exit" button please.


  • Step 4:Found new hardware wizard: Searching and installing
    Please wait for a few minutes as because the wizard will automatically search for and install the driver.



  • Step 5: Found new hardware wizard: Finish
    After installation is complete please click on button "Finish", and reboot your system.


  • Step 6: Adjust the setting (If needed)
    After installation is done, you will find a NVIDIA icon by the status taskbar's. You may click this icon to open the control panel where you can make further changes to your preference.