R181-Z91

Rev. A00 Rev. 100 Rev. B00

Rack Server - AMD EPYC™ 7002/7001 - 1U DP 10-Bay Gen3 NVMe/SATA/SAS

# Networking

Dual AMD EPYC™ 7002/7001 Series Processors
8-Channel DDR4 RDIMM/LRDIMM, 32 x DIMMs
2 x 1Gb/s LAN ports via Intel^® I350-AM2
2 x 2.5" Gen3 NVMe hot-swappable bays
8 x 2.5" SATA/SAS hot-swappable bays
1 x M.2 slot with PCIe Gen3 x4 interface
3 x LP PCIe Gen3 x16 and x8 slots
2 x OCP Gen3 x16 mezzanine slots
Dual 1200W 80 PLUS Platinum redundant power supply

Get a Quote

비교

Get a Quote

* 사이트에서 제공되는 모든 자료는 참조용일 뿐입니다. 기가바이트는 사이트의 자료를 사전 통지없이 언제든지 수정할 권리를 지닙니다.
* 모든 상표와 로고는 해당 소유자의 자산입니다.
* PC의 표준 아키텍쳐에 의해, 메모리의 특정 부분이 시스템에 사용되어 실제 메모리 크기는 표준보다 적게 표시될 수 있습니다.

SPECIFICATIONS

Dimensions (WxHxD, mm)

1U
438 x 43.5 x 710

Motherboard

MZ91-FS0

CPU

AMD EPYC™ 7002 Series Processors
AMD EPYC™ 7001 Series Processors
Dual processor, 7nm technology
Up to 64 cores, 128 threads per processor
TDP up to 225W, cTDP up to 240W

Supports 280W CPU at ambient 30°C

Note: If only 1 CPU is installed, some PCIe or memory functions might be unavailable.

Chipset

System on Chip

Memory

32 x DIMM slots
DDR4 memory supported only
8-Channel memory architecture
RDIMM up to 128GB supported
LRDIMM up to 128GB supported
Memory speed: Up to 3200*/2933 MT/s

*Follow BIOS setting and memory QVL if running 3200 MT/s with 2DPC.

LAN

Rear side:
2 x 1Gb/s LAN ports (1 x Intel^® I350-AM2)
1 x 10/100/1000 Mbps Management LAN

Video

Integrated in Aspeed^® AST2500
- 1 x VGA port

Storage

Front side:
2 x 2.5" Gen3 NVMe hot-swappable bays, from CPU_0
8 x 2.5" SATA/SAS hot-swappable bays

SAS card is required for SAS devices support

SAS

Depends on SAS add-in cards

RAID

N/A

Expansion Slots

Riser Card CRS1021:
- 2 x PCIe x8 (Gen3 x8) low-profile slots, from CPU_0

Riser Card CRS1015:
- 1 x PCIe x16 (Gen3 x16) low-profile slot, from CPU_1

1 x OCP mezzanine slot with PCIe Gen3 x16 bandwidth, from CPU_0 (Type1, P1, P2, P3, P4)
1 x OCP mezzanine slot with PCIe Gen3 x16 bandwidth, from CPU_1 (Type1, P1, P2, P3, P4)

1 x M.2 slot:
- M-key
- PCIe Gen3 x4, from CPU_0
- Supports 2242/2260/2280 cards
- CPU TDP is limited to 180W if using M.2 device

Internal I/O

6 x SlimSAS connectors
1 x M.2 slot
2 x CPU fan headers
1 x USB 3.0 header
1 x TPM header
5 x PCIe expansion slots
2 x OCP mezzanine slots
2 x Power supply connectors
1 x Front panel header
1 x Backplane board header
1 x IPMB connector
1 x Clear CMOS jumper
1 x BIOS recovery jumper

Front I/O

1 x USB 3.0
1 x Power button with LED
1 x ID button with LED
1 x NMI button
1 x Reset button
2 x LAN activity LEDs
1 x Storage activity LED
1 x System status LED

Rear I/O

2 x USB 3.0
1 x VGA
1 x COM (RJ45 type)
2 x RJ45
1 x MLAN
1 x ID button with LED

Backplane Board

Speed and bandwidth:
PCIe Gen3 x4 or SATA 6Gb/s or SAS 12Gb/s

TPM

1 x TPM header with LPC interface
- Optional TPM2.0 kit: CTM000

Power Supply

Dual 1200W 80 PLUS Platinum redundant power supply

AC Input:
- 100-240V~/ 12-7A, 50-60Hz

DC Input: (Only for China)
- 240Vdc/ 6A

DC Output:
- Max 1000W/ 100-240V~
+12V/ 80.5A
+12Vsb/ 3A
- Max 1200W/ 200-240V~ or 240Vdc Input
+12V/ 97A
+12Vsb/ 3A

System Management

Aspeed^® AST2500 Baseboard Management Controller
GIGABYTE Management Console web interface

Dashboard
JAVA Based Serial Over LAN
HTML5 KVM
Sensor Monitor (Voltage, RPM, Temperature, CPU Status …etc.)
Sensor Reading History Data
FRU Information
SEL Log in Linear Storage / Circular Storage Policy
Hardware Inventory
Fan Profile
System Firewall
Power Consumption
Power Control
LDAP / AD / RADIUS Support
Backup & Restore Configuration
Remote BIOS/BMC/CPLD Update
Event Log Filter
User Management
Media Redirection Settings
PAM Order Settings
SSL Settings
SMTP Settings

OS Compatibility

For AMD EPYC™ 7002 Series Processors

Citrix Hypervisor 8.1.0

Red Hat Enterprise Linux 7.6 or later
Red Hat Enterprise Linux 8.0 or later
Red Hat Enterprise Linux 9.0 or later

SUSE Linux Enterprise Server 12 SP4 or later
SUSE Linux Enterprise Server 15 SP1 or later

Ubuntu 16.04.6 LTS or later
Ubuntu 18.04.3 LTS or later
Ubuntu 20.04 LTS or later

VMware ESXi 6.5 EP15 or later
VMware ESXi 6.7 Update3 or later
VMware ESXi 7.0 or later
VMware ESXi 8.0 or later

Windows Server 2016 (X2APIC/256T not supported)
Windows Server 2019

For AMD EPYC™ 7001 Series Processors

Citrix Xenserver 7.1.0 CU2 or later
Citrix Xenserver 7.4.0 or later
Citrix Hypervisor 8.0.0 or later

Red Hat Enterprise Linux 7.4 or later
Red Hat Enterprise Linux 8.0 or later
Red Hat Enterprise Linux 9.0 or later

SUSE Linux Enterprise Server 11 SP4 or later
SUSE Linux Enterprise Server 12 SP3 or later
SUSE Linux Enterprise Server 15 or later

Ubuntu 16.04 LTS or later
Ubuntu 18.04 LTS or later
Ubuntu 20.04 LTS or later

VMware ESXi 6.5 Update1 or later
VMware ESXi 6.7 or later
VMware ESXi 7.0 or later
VMware ESXi 8.0 or later

Windows Server 2012 R2 with Update
Windows Server 2016
Windows Server 2019

System Fans

8 x 40x40x56mm (23,000rpm)

Operating Properties

Operating temperature: 10°C to 35°C
Operating humidity: 8%-80% (non-condensing)
Non-operating temperature: -40°C to 60°C
Non-operating humidity: 20%-95% (non-condensing)

Weight

Net Weight: 13 kg
Gross Weight: 21 kg

Packaging Dimensions

985 x 588 x 250 mm

Packaging Content

1 x R181-Z91
2 x CPU heatsinks
1 x Rail kit

Part Numbers

- Barebone package: 6NR181Z91MR-00-A*
- Motherboard: 9MZ91FS0NR-00-2*
- Rail kit: 25HB2-3A0202-K0R
- CPU heatsink: 25ST1-15320D-J1R
- Backplane board - CBP10A4: 9CBP10A4NR-00
- Riser card - CRS1021: 9CRS1021NR-00
- Riser card - CRS1015: 9CRS1015NR-00
- Fan module: 25ST2-44562G-D0R
- Power supply: 25EP0-212002-F3S
- Airduct dummy: 25EK4-R18200-S9R

Optional parts:

- RJ45 type COM cable: 25CR0-200400-Y4R

SUPPORT

다운로드

드라이버
BIOS
유틸리티
Firmware

매뉴얼
Support List

Online Support

드라이버

BIOS

유틸리티

Firmware

QVL

All
All
Windows Server 2019
Windows Server 2016 64bit

Chipset

버전

사이즈

날짜

AMD Chipset Driver

Version : 1.07.12.1102

17.05 MB

Aug 06, 2019

R181-Z91

SPECIFICATIONS

SUPPORT

RESOURCES

R181-Z91 (Rev. A00)