- Home
- Enterprise
- High Density Servers
- H263-V11-LAW1
H263-V11-LAW1
HPC/AI Arm Server - NVIDIA GH200 Grace Hopper Superchip - 2U 4-Node 16-Bay Gen5 NVMe DLC
- Direct liquid cooling solution with leak detection
- CPU+GPU design for giant-scale AI and HPC
- 2U 4-node rear access server system
- NVIDIA GH200 Grace Hopper Superchip
- 900GB/s NVIDIA® NVLink®-C2C Interconnect
- 480GB CPU LPDDR5X ECC memory per module
- Up to 144GB GPU HBM3e per module
- Compatible with NVIDIA BlueField®-3 DPUs
- 8 x 10Gb/s LAN ports via Intel® X550-AT2
- 1 x CMC port
- 16 x 2.5" Gen5 NVMe hot-swap bays
- 8 x M.2 slots with PCIe Gen5 x4 interface
- 4 x FHHL PCIe Gen5 x16 slots
- 4 x OCP NIC 3.0 PCIe Gen5 x16 slots
- Triple 3000W 80 PLUS Titanium redundant power supply
Ordering Numbers: 6NH263V11DR000LAW1*
* The entire materials provided herein are for reference only. GIGABYTE reserves the right to modify or revise the content at anytime without prior notice.
* Advertised performance is based on maximum theoretical interface values from respective Chipset vendors or organization who defined the interface specification. Actual performance may vary by system configuration.
* All trademarks and logos are the properties of their respective holders.
* Due to standard PC architecture, a certain amount of memory is reserved for system usage and therefore the actual memory size is less than the stated amount.
* Advertised performance is based on maximum theoretical interface values from respective Chipset vendors or organization who defined the interface specification. Actual performance may vary by system configuration.
* All trademarks and logos are the properties of their respective holders.
* Due to standard PC architecture, a certain amount of memory is reserved for system usage and therefore the actual memory size is less than the stated amount.
SPECIFICATIONS
Dimensions (WxHxD, mm)
2U 4-Node - Rear access
440 x 87.5 x 850
440 x 87.5 x 850
Motherboard
MV13-HD0
Superchip
Per node:
NVIDIA GH200 Grace Hopper Superchip:
- 1 x NVIDIA Grace™ CPU
- 1 x NVIDIA Hopper™ GPU
- Connected with NVIDIA® NVLink®-C2C
- TDP up to 1000W (CPU + GPU + memory)
NVIDIA GH200 Grace Hopper Superchip:
- 1 x NVIDIA Grace™ CPU
- 1 x NVIDIA Hopper™ GPU
- Connected with NVIDIA® NVLink®-C2C
- TDP up to 1000W (CPU + GPU + memory)
Memory
Per node:
NVIDIA Grace CPU:
- 480GB of LPDDR5X memory with ECC
- Memory bandwidth up to 512GB/s
NVIDIA Hopper GPU:
- 96GB HBM3 [1]
- Memory bandwidth up to 4TB/s [1]
[1] Modules with 144GB of HBM3e GPU memory and 4.9TB/s memory bandwidth are also available. Please contact our sales representatives for more details.
NVIDIA Grace CPU:
- 480GB of LPDDR5X memory with ECC
- Memory bandwidth up to 512GB/s
NVIDIA Hopper GPU:
- 96GB HBM3 [1]
- Memory bandwidth up to 4TB/s [1]
[1] Modules with 144GB of HBM3e GPU memory and 4.9TB/s memory bandwidth are also available. Please contact our sales representatives for more details.
LAN
Rear:
8 x 10Gb/s LAN (4 x Intel® X550-AT2)
- Support NCSI function
4 x 10/100/1000 Mbps Management LAN
1 x CMC Management LAN
8 x 10Gb/s LAN (4 x Intel® X550-AT2)
- Support NCSI function
4 x 10/100/1000 Mbps Management LAN
1 x CMC Management LAN
Video
Integrated in ASPEED® AST2600 x 4
- 4 x Mini-DP
- 4 x Mini-DP
Storage
Front hot-swap:
16 x 2.5" Gen5 NVMe
Internal M.2:
8 x M.2 (2280/22110), PCIe Gen5 x4, from PEX89048
16 x 2.5" Gen5 NVMe
Internal M.2:
8 x M.2 (2280/22110), PCIe Gen5 x4, from PEX89048
SAS
N/A
RAID
N/A
PCIe Expansion Slots
PCIe Cable x 4:
- 4 x FHHL x16 (Gen5 x16)
4 x OCP NIC 3.0 (Gen5 x16)
- Support NCSI function
- 4 x FHHL x16 (Gen5 x16)
4 x OCP NIC 3.0 (Gen5 x16)
- Support NCSI function
Front I/O
4 x Power buttons with LED
4 x ID buttons with LED
4 x Reset buttons
4 x System status LEDs
1 x CMC status LED
1 x CMC reset button
4 x ID buttons with LED
4 x Reset buttons
4 x System status LEDs
1 x CMC status LED
1 x CMC reset button
Rear I/O
8 x USB 3.2 Gen1 ports (Type-A)
4 x Mini-DP
8 x RJ45 ports
4 x MLAN ports
4 x ID LEDs
1 x CMC port
4 x Mini-DP
8 x RJ45 ports
4 x MLAN ports
4 x ID LEDs
1 x CMC port
Backplane Board
Speed and bandwidth:
PCIe Gen5 x4
PCIe Gen5 x4
Security Modules
1 x TPM header with SPI interface
- Optional TPM2.0 kit: CTM012
- Optional TPM2.0 kit: CTM012
Power Supply
Triple 3000W 80 PLUS Titanium redundant power supply [1]
AC Input:
- 100-127V~/ 16A, 50/60Hz
- 200-207V~/ 16A, 50/60Hz
- 208-240V~/ 16A, 50/60Hz
DC Input: (Only for China)
- 240Vdc/ 16A
DC Output:
- Max 1200W/ 100-127V~
+12.2V/ 98.36A
+12.2Vsb/ 3A
- Max 2600W/ 200-207V~
+12.2V/ 213A
+12.2Vsb/ 3A
- Max 3000W/ 208-240V~ or 240Vdc Input
+12.2V/ 245.9A
+12.2Vsb/ 3A
[1] The system power supply requires C19 power cord.
AC Input:
- 100-127V~/ 16A, 50/60Hz
- 200-207V~/ 16A, 50/60Hz
- 208-240V~/ 16A, 50/60Hz
DC Input: (Only for China)
- 240Vdc/ 16A
DC Output:
- Max 1200W/ 100-127V~
+12.2V/ 98.36A
+12.2Vsb/ 3A
- Max 2600W/ 200-207V~
+12.2V/ 213A
+12.2Vsb/ 3A
- Max 3000W/ 208-240V~ or 240Vdc Input
+12.2V/ 245.9A
+12.2Vsb/ 3A
[1] The system power supply requires C19 power cord.
System Management
ASPEED® AST2600 Baseboard Management Controller
ASPEED® AST2520 Chassis Management Controller
GIGABYTE Management Console web interface
ASPEED® AST2520 Chassis Management Controller
GIGABYTE Management Console web interface
- Dashboard
- HTML5 KVM
- Sensor Monitor (Voltage, RPM, Temperature, CPU Status …etc.)
- Sensor Reading History Data
- FRU Information
- SEL Log in Linear Storage / Circular Storage Policy
- Hardware Inventory
- Fan Profile
- System Firewall
- Power Consumption
- Power Control
- Advanced power capping
- LDAP / AD / RADIUS Support
- Backup & Restore Configuration
- Remote BIOS/BMC/CPLD Update
- Event Log Filter
- User Management
- Media Redirection Settings
- PAM Order Settings
- SSL Settings
- SMTP Settings
OS Compatibility
Please refer to OS compatibility table in support page
System Fans
4 x 80x80x80mm (16,500rpm)
Operating Properties
Operating temperature: 10°C to 40°C
Operating humidity: 8-80% (non-condensing)
Non-operating temperature: -40°C to 60°C
Non-operating humidity: 20%-95% (non-condensing)
[Note] To ensure system stability and prevent condensation, when the relative humidity exceeds 50%, the coolant inlet temperature must be higher than the dry-bulb temperature and it should not exceed 40°C.
Operating humidity: 8-80% (non-condensing)
Non-operating temperature: -40°C to 60°C
Non-operating humidity: 20%-95% (non-condensing)
[Note] To ensure system stability and prevent condensation, when the relative humidity exceeds 50%, the coolant inlet temperature must be higher than the dry-bulb temperature and it should not exceed 40°C.
Packaging Dimensions
1181 x 715 x 336 mm
Packaging Content
1 x H263-V11-LAW1
4 x Superchip cold plate loops
1 x Mini-DP to D-Sub cable
1 x 3-Section Rail kit
4 x Superchip cold plate loops
1 x Mini-DP to D-Sub cable
1 x 3-Section Rail kit
Part Numbers
- Barebone w/ NVIDIA module: 6NH263V11DR000LAW1*
- Motherboard: 9MV13HD0NR-000*
- 3-Section Rail kit: 25HB2-A66125-K0R
- Superchip cold plate loop: 25ST7-3000Z7-C4R
- Front panel board - CFPH004: 9CFPH004NR-00*
- Backplane board - CBPH7O1: 9CBPH7O1NR-00*
- Fan module: 25ST2-888020-S1R
- M.2 riser card - CMTP0A2: 9CMTP0A2NR-00*
- LAN board - CLBH010: 9CLBH010NR-00*
- Leak sensor board - CDB86: 9CDB86NR-00*
- Mini-DP to D-Sub cable: 25CRN-200801-K1R
- Power supply: 25EP0-23000L-L0S
Optional parts:
- C19 power cord 125V/15A (US): 25CP1-018000-Q0R
- C19 power cord 250V/16A (EU): 25CP3-01830H-Q0R
- C19 power cord 125V/15A (JP): 25CPA-01830B-Q0R
- GIGABYTE Superchip cold plate loop: 25H26-3V10000-E29X (QPA:4)
- GIGABYTE 2U4N Manifold: 25H27-3Z80000-E07X (1 set per rack)
- Motherboard: 9MV13HD0NR-000*
- 3-Section Rail kit: 25HB2-A66125-K0R
- Superchip cold plate loop: 25ST7-3000Z7-C4R
- Front panel board - CFPH004: 9CFPH004NR-00*
- Backplane board - CBPH7O1: 9CBPH7O1NR-00*
- Fan module: 25ST2-888020-S1R
- M.2 riser card - CMTP0A2: 9CMTP0A2NR-00*
- LAN board - CLBH010: 9CLBH010NR-00*
- Leak sensor board - CDB86: 9CDB86NR-00*
- Mini-DP to D-Sub cable: 25CRN-200801-K1R
- Power supply: 25EP0-23000L-L0S
Optional parts:
- C19 power cord 125V/15A (US): 25CP1-018000-Q0R
- C19 power cord 250V/16A (EU): 25CP3-01830H-Q0R
- C19 power cord 125V/15A (JP): 25CPA-01830B-Q0R
- GIGABYTE Superchip cold plate loop: 25H26-3V10000-E29X (QPA:4)
- GIGABYTE 2U4N Manifold: 25H27-3Z80000-E07X (1 set per rack)
* The entire materials provided herein are for reference only. GIGABYTE reserves the right to modify or revise the content at anytime without prior notice.
* Advertised performance is based on maximum theoretical interface values from respective Chipset vendors or organization who defined the interface specification. Actual performance may vary by system configuration.
* All trademarks and logos are the properties of their respective holders.
* Due to standard PC architecture, a certain amount of memory is reserved for system usage and therefore the actual memory size is less than the stated amount.
* Advertised performance is based on maximum theoretical interface values from respective Chipset vendors or organization who defined the interface specification. Actual performance may vary by system configuration.
* All trademarks and logos are the properties of their respective holders.
* Due to standard PC architecture, a certain amount of memory is reserved for system usage and therefore the actual memory size is less than the stated amount.
SUPPORT
BIOS
Firmware
OS
BIOS
Description
Version
Size
Date
1. Supports NVIDIA Chipset WebUI BIOS Item.
2. Modifies BIOS updates behavior.
3. Updates AST2600 UEFI Driver v1.13.05.
4. Supports Intel LAN UEFI driver.
Version : F19
18.01 MB
Feb 06, 2025
1. Removed Mellanox CX7 duplicate MAC in boot option
2. Added SMBIOS Type39 PSU detected
3. Modified Redfish BiosAttribute item
2. Added SMBIOS Type39 PSU detected
3. Modified Redfish BiosAttribute item
Version : F18
18.09 MB
Nov 11, 2024
1) Fixed PKfail Vulnerability.
2) Updated to NVIDIA Firmware 02.02.02.
3) Multiple feature updates and bug fixes.
2) Updated to NVIDIA Firmware 02.02.02.
3) Multiple feature updates and bug fixes.
Version : F15
17.91 MB
Aug 23, 2024
Windows and UEFI mode flash BIOS SOP
Please download BIOS update tool from AMI Website
-
0.31 MB
Jan 29, 2021
Warning:
Because BIOS flashing is potentially risky, if you do not encounter problems using the current version of BIOS, it is recommended that you not flash the BIOS. To flash the BIOS, do it with caution. Inadequate BIOS flashing may result in system malfunction.
What is a BETA?
BETA describes a new version that is reliable yet may not include all the features of the final product. During this phase we are previewing new features and gathering customer input to insure our product provides the best experience possible.
Because BIOS flashing is potentially risky, if you do not encounter problems using the current version of BIOS, it is recommended that you not flash the BIOS. To flash the BIOS, do it with caution. Inadequate BIOS flashing may result in system malfunction.
What is a BETA?
BETA describes a new version that is reliable yet may not include all the features of the final product. During this phase we are previewing new features and gathering customer input to insure our product provides the best experience possible.
Firmware
Description
Version
Size
Date
BMC firmware with embedded GIGABYTE Management Console
(AST2600)
For NVIDIA Grace/ Grace Hopper platform
For NVIDIA Grace/ Grace Hopper platform
Version : 13.99.09
114.4 MB
Mar 29, 2024
English
Description
Version
Size
Date
OS Support List
Version : 1.0
0.02 MB
Mar 28, 2024
NVIDIA Grace/ Grace Hopper OS Support List
RESOURCES
Articles
Solutions
News
Others
Back to H263-V11-LAW1
