S260-NF0

Discontinued

Rev. 100

2U NVMe Over Fabric Storage

Western Digital Onyx NVMe Over Fabric storage controller
Fully supports iWARP, RoCE v1 and v2
Dual controller architecture
1 x 100Gb/s or 2 x 50Gb/s Ethernet port(s) via QSFP28 interface
1 x AST2520 management port per node
24 x 2.5" NVMe hot-swappable bays
3 x PCIe Gen3 x16 slots per node
Dual 800W 80 PLUS Platinum redundant power supply

* The entire materials provided herein are for reference only. GIGABYTE reserves the right to modify or revise the content at anytime without prior notice.
* Advertised performance is based on maximum theoretical interface values from respective Chipset vendors or organization who defined the interface specification. Actual performance may vary by system configuration.
* All trademarks and logos are the properties of their respective holders.
* Due to standard PC architecture, a certain amount of memory is reserved for system usage and therefore the actual memory size is less than the stated amount.

SPECIFICATIONS

Dimensions (WxHxD, mm)

2U
440 x 87 x 695

Motherboard

2 x CPBD530
Embedded Microsemi PM8536B-FEI PICe switch with 96 Lanes
Pre-installed 1 x Western Digital Onyx NVMe Host Bus Adapter* in each CPBD530
Each CPBD530 board controls 12 x NVMe SSD devices with PCIe x4 bandwidth per port

*NOTE: Up to 3 x Western Digital Onyx NVMe Host Bus Adapters on each CPBD530 board

CPU

Western Digital Onyx NVMeOF Bridge ASIC

Socket

Embedded

Chipset

N/A

Memory

N/A

LAN

Rear side:
1 x 100Gb/s or 2 x 50Gb/s Ethernet port(s) via QSFP28 interface
1 x 10/100/1000 management LAN

Video

Integrated in Aspeed^® AST2520

Storage

Front side:
24 x 2.5" NVMe hot-swappable bays

SATA

N/A

SAS

N/A

RAID

N/A

Expansion Slots

Per node:
Total 3 x PCIe Gen3 x16 slots for Western Digital Onyx NVMeOF HBAs per node
- 2 x PCIe x16 (Gen3 x16) full-height slots
- 1 x PCIe x16 (Gen3 x16) low-profile slot

Internal I/O

N/A

Front I/O

1 x Power button with LED
1 x ID button with LED
1 x Reset button
1 x System status LED

Rear I/O

1 x QSFP28
1 x MLAN
1 x Serial port
1 x Power button with LED
1 x ID button with LED
1 x BMC Reset button
1 x System Reset button
1 x System status LED

Backplane Board

Speed and bandwidth:
PCIe Gen3 x4

TPM

N/A

Power Supply

2 x 800W 80 PLUS Platinum redundant power supplies

AC Input:
- 100-240V~/ 10-4A, 50-60Hz

DC Input:
- 240Vdc/ 4.5A

DC Output:
- Max 800W
+ 12V/ 66A
+ 12Vsb/ 2.5A

System Management

Aspeed^® AST2520 management controller

OS Compatibility

N/A

System Fans

4 x 80x80x38mm (16,300rpm)

Operating Properties

Operating temperature: 10°C to 35°C
Operating humidity: 8-80% (non-condensing)
Non-operating temperature: -40°C to 60°C
Non-operating humidity: 20%-95% (non-condensing)

Weight

Net Weight: 17 kg
Gross Weight: 28.8 kg

Packaging Dimensions

1038 x 697 x 311 mm

Packaging Content

1 x S260-NF0
1 x Rail kit

Part Numbers

- Barebone package: 6NS260NF0MR-00-1*
- Controller board: 9CPBD530NR-00
- NVMeOF bridge controller: 25FCZ-ONYX20-M9R
- Rail kit: 25HB2-AN6103-K0R
- Front panel board - CFPH004: 9CFPH004NR-00
- Backplane board - CBPD0O1: 9CBPD0O1NR-00
- Fan module: 25ST2-88382A-D0R
- Riser card - CRSD020: 9CRSD020NR-00
- Power supply: 25EP0-208004-L0S